Please select your location for an optimal experience.

Installation

Here you'll find information on installing our units in an existing building or one under construction.

Atomik model

The Atomik was designed to be portable, but you can also wall-mount them in just a few minutes.

Download

Compact series

Compact series vacuum cleaners can be installed in a couple of easy steps: attach the unit to the wall, connect the air inlet and outlet, and that’s that!

Cyclonik series

Cyclonik series vacuum cleaners can be installed in a couple of easy steps: attach the unit to the wall, connect the air inlet and outlet, and that’s that!

Download

Automatik series

In addition to the usual installation steps, Automatik series vacuum cleaners just need to be connected to the cold water supply and to the sewer system.

Download

ProXtrak series

ProXtrak series units do not need to be wall-mounted. The unit just needs to be placed over a toilet or over a floor drain.

Download

Pneumatik model

We recommend wall-mounting the Pneumatik separator over a container. The unit should then be connected to the piping network (air inlet) and then to the suction system. As for the piston, it only needs a 100 PSI (6.9 Bar) filtered air inlet.

Download