Cyclonic-action separator designed to collect dense materials and liquids before they clog up your vacuum system.

This motor-less separator can be installed near the work area for easy maintenance while the vacuum system is located elsewhere to reduce noise.

The separator can also pick up liquids without risk even if the vacuum system is not designed for this purpose.

* This unit has no motor and needs to be used with another vacuum system.

Please note that online purchases and shipping are not available outside of Canada. For online purchases, please visit our partner's website: https://www.thinkvacuums.com/central-vacuums/drainvac
  • Liquid
    Substances
  • Solid
    Substances

Features

  • Collects dense materials before they clog up your vacuum system
  • Central vacuum system can be installed away from the work area to decrease noise
  • Can also pick up liquids even if the vacuum system is not designed for this purpose
  • Protects the vacuum by functioning as an intermediary
  • Ultra-large-capacity canister (10 gal. / 46 L)
  • Bagless system
  • Can be added to any vacuum system
  • Bag-catcher included
Central vacuum separator | Central vacuum separator

Features

  • Collects dense materials before they clog up your vacuum system
  • Cartridge filter protects motor if fine dust is picked up
  • Central vacuum system can be installed away from the work area to decrease noise
  • Protects the vacuum by functioning as an intermediary
  • Ultra-large-capacity canister (10 gal. / 46 L)
  • Bagless system
  • Can be added to any vacuum system
Central vacuum separator | Central vacuum separator

Features

  • Can also pick up liquids even if the vacuum system is not designed for this purpose
  • Protects the vacuum by functioning as an intermediary
  • Float valve shows when maximum water level has been reached
  • Cyclonic action generates constant and optimal suction power
  • Ultra-large-capacity canister (10 gal. / 46 L)
  • Bagless system
  • Can be added to any vacuum system
Central vacuum separator | Central vacuum separator

Features

  • Collects dense materials before they clog up your vacuum system
  • Central vacuum system can be installed away from the work area to decrease noise
  • Protects the vacuum by functioning as an intermediary
  • Ultra-large-capacity canister (12 gal. / 54 L)
  • 3 in. / 75 mm air inlet and outlet for higher flow rate
  • Bagless system
  • Can be added to any vacuum system
Central vacuum separator | Central vacuum separator

Features

  • Collects dense materials before they clog up your vacuum system
  • Cartridge filter protects motor if fine dust is picked up
  • Central vacuum system can be installed away from the work area to decrease noise
  • Protects the vacuum by functioning as an intermediary
  • Ultra-large-capacity canister (12 gal. / 54 L)
  • 3 in. / 75 mm air inlet and outlet for higher flow rate
  • Bagless system
  • Can be added to any vacuum system
Central vacuum separator | Central vacuum separator

Technical specifications

Unit

Capacity 45 L 10 gal.
Size 38 cm dia. x 74 cm 15” dia x 29”

Technical specifications

Unit

Capacity 45 L 10 gal.
Size 38 cm dia. x 74 cm 15” dia x 29”

Technical specifications

Unit

Capacity 45 L 10 gal.
Size 38 cm dia. x 74 cm 15” dia x 29”

Technical specifications

Unit

Capacity 54 L 12 gal.
Size 38 cm dia. x 89 cm 15” dia x 35”

Technical specifications

Unit

Capacity 54 L 12 gal.
Size 38 cm dia. x 89 cm 15” dia x 35”

Warning

Never vacuum flammable or gaseous material with your Drainvac system. See user manual.

This unit has no motor and needs to be used with another vacuum system.

This unit is approved by the Canadian Standards Association.
This unit is approved by the European Economic Area.
This unit is approved by the Australian Standards.

Drainvac warranty for commercial use

  • Motor(s) : 3 years or 750 hours
  • Circuits : 3 years or 750 hours
  • Casing : lifetime
  • Labor : 1 year or 500 hours (at an authorized Drainvac dealer or plant). The shipment of any items and the travel up to a retailer or to the manufacturer are at customer expense.
  • Drainvac accessories : 90 days
  • Regular accessories : 90 days
  • Replacement parts : 90 days
  • Recommendation : checking and cleaning of the unit and motor(s) after 500 hours are at the customer's expense.
  • See terms and conditions

Expert advice

August 12, 2019

What are the best accessories for my central vacuum?

In order to ease your cleaning task with a central vacuum, it is important to choose the right accessories to meet your needs. This article presents several of these tools and their usefulness in your...

Read
January 15, 2019

Buying A Commercial Or Industrial Central Vacuum?

Despite a smaller initial cost, the commercial line is not automatically the best option on the long term when the time comes to buy a cleaning system. The industrial system can be a more durable and ...

Read
March 6, 2017

Protect The Central Vacuum From Vacuumed Bags

Our cleaning systems can handle anything from dust, dirt, food and even liquids. But it may also occur to vacuum plastic bags, dirty rags and such. These oversize items can easily cover a lot of space...

Read
July 20, 2016

Body Shops: What’s The Best Way of Getting Rid of Aluminum Dust?

Automotive repair specialists are regularly exposed to carcinogenic volatile substances. It goes without saying that adequate ventilation in these workshops is essential and that workers must wear app...

Read

Contact us
for more information!
1 (800) 408-1448

All fields identified by an asterisk (*) are mandatory.

* Terms and conditions

The warranty covers all defects in manufacturing and materials produced by Drainvac International 2006 Inc. It excludes damage caused by normal wear and tear, improper use, or any modifications to the product. Drainvac cannot be held responsible for any direct, indirect or special damage resulting from use of the product.

Keep all receipts / proof of purchase for your unit. The date on these documents is used to establish the warranty period. If a request for warranty service is made, you must present these proof of purchase documents. If proof of purchase cannot be produced, the warranty period will be determined by the product’s manufacture date.

The warranty does not apply if the standard maintenance procedures recommended by Drainvac have not been followed or if a repair has been made by an unauthorized Drainvac retailer. Furthermore, the warranty is void: if damage is caused by misuse or inappropriate use of the appliance (refer to the recommendations in the user manual); if damage is caused by vacuuming plaster dust or other similar fine dust; if the unit is damaged by fire after vacuuming ashes or cigarette butts; following a change of owner or location of the original installation; if damage is caused by a flood, by any other natural disaster or electrical overload.

* Conditions common to all types of use (residential, commercial and industrial):

  • The motor warranty is valid only if the carbon motor brushes wear out in an abnormal or uneven manner (one brush is completely worn while the other is almost new). If the two carbon brushes are both completely worn, this is considered normal wear and tear and the motor is therefore not eligible for repair or replacement under warranty.
  • The use of dust bags, bag filter, foam filter and cartridge filter is required for devices that work with bags and/or filters.
    Improper installation of these could allow dust to infiltrate the motor(s) and void the warranty. In addition, the wear of the filters is considered normal and is not covered by the warranty.
  • The warranty does not cover piping, fittings, plugs or improper installation.
  • Shipping and travel are at the customer’s expense.
  • Proper maintenance of the device is suggested during the warranty period and proper maintenance of filters is also suggested as needed.

*Terms and conditions Venmar-Broan-NuTone

Metal MP Inc. warrants to the original consumer purchaser that its central vacuum power unit will be free from defects in materials and workmanship for five (5) years for 550VF1, BQ550, PP5501, NC1500, NCKIT1500 and MP.AIR550 units, eight (8) years for 650VF1, BQ650, PP6501, NC3500, NC4500, NCKIT3500 and MP.AIR650 units and ten (10) years for 700VF1, BQ700, PP7001, NC5500, NCKIT5500 and MP.AIR700 units. This warranty covers the parts and labor in an authorized service center for the first three (3) years of the warranty for 550VF1, BQ550, PP5501, NC1500, NCKIT1500 and MP.AIR550 units, the first five (5) years of the warranty for 650VF1, BQ650, PP6501, NC3500, NC4500, NCKIT3500 and MP.AIR650 units, the first six (6) years of the warranty for 700VF1, BQ700, PP7001, NC5500, NCKIT5500 and MP.AIR700 units. After these time periods, the parts only will be covered under this warranty. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

During these time periods, Metal MP Inc. will, at its option, repair or replace the power unit or part without charge, which is found to be defective under normal use and service. THIS WARRANTY DOES NOT APPLY TO THE INSTALLATION OR THE PARTS USED IN THE INSTALLED TUBING SYSTEM. All central vacuum hoses, electric or air-driven brushes, filters, attachments and accessories are warranted for one (1) year from the original purchase date with the exception to consumables such as light bulbs and belts. We invite you to register your product online at www.drainvac.com. Metal MP Inc. reserves the right to limit this warranty if the product is not registered.

This warranty does not cover normal maintenance and service or any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by Metal MP Inc. or an authorized representative), faulty installation or installation contrary to recommended installation instructions.

The duration of any implied warranty is limited to the period as specified for the express warranty.

METAL MP INC.’S OBLIGATION TO REPAIR OR REPLACE, AT METAL MP INC.’S OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. METAL MP INC. SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Please do not return your unit to place of purchase. Please visit www.drainvac.com for your closest service center. You may also call 1-800-408-1448 for the name of an authorized representative in your area. This warranty supersedes all prior warranties.

Warranty service is to be completed by an authorized Service Center designated by Metal MP Inc. Where applicable, in home service will be made available only in areas where a contracted service provider offers service during the first three (3) years of the warranty for 550VF1, BQ550, PP5501, NC1500, NCKIT1500 and MP.AIR550 units, during the first five (5) years of the warranty for 650VF1, BQ650, PP6501, NC3500, NC4500, NCKIT3500 and MP.AIR650 units and during the first six (6) years of the warranty for 700VF1, BQ700, PP7001, NC5500, NCKIT5500 and MP.AIR700 units. If in home service is not available, the product will be repaired or replaced, at Metal MP Inc.’s discretion, by the nearest authorized service provider. The unit removal and reinstallation works are under the customer responsibility, and Metal MP Inc. cannot be charged for them.

To qualify for warranty service, you must notify Metal MP Inc. at contact@drainvac.com or at 1-800-408-1448. We will then forward you the authorized service center in your area. You will be required to present evidence of the original purchase date.