Compact series

Compact series vacuum cleaners can be installed in a couple of easy steps: attach the unit to the wall, connect the air inlet and outlet, and that’s that!

Download

Cyclonik series

Cyclonik series vacuum cleaners can be installed in a couple of easy steps: attach the unit to the wall, connect the air inlet and outlet, and that’s that!

Download

Automatik series

In addition to the usual installation steps, Automatik series vacuum cleaners just need to be connected to the cold water supply and to the sewer system.

Download
 ProXtrak series

ProXtrak series

ProXtrak series units do not need to be wall-mounted. The unit just needs to be placed over a toilet or over a floor drain.

Pneumatik model

We recommend wall-mounting the Pneumatik separator over a container. The unit should then be connected to the piping network (air inlet) and then to the suction system. As for the piston, it only needs a 100 PSI (6.9 Bar) filtered air inlet.

Download

Booster Head

Booster heads can be installed in a jiffy: put the head up onto the wall, connect the air inlet to the unit and the air outlet to the piping network coming out of the building.

Download